800-452-4902
 
ll
 
RUPTURE PROTECTED FRONT AND BACK DOMEHEAD PLUGS

 15”-30” Rupture Protected
 Multi-Size Front Plug

 ALSO AVAILABLE:
 Replacement Rubber Dirt Covers
 Part No: 50-004
 Relief Valve Installation Socket
 Part No: 08-100RVS

 REPLACEMENT VALVES:
 For 15”-30” & 20”-36” Front & Back Plugs
 Part No: 21-150
 For 24”-48” Front & Back Plugs
 Part No: 21-151






The new LANSAS Rupture Protected Pipe Plugs have a built in relief valve that will help prevent the plug from being over inflated due to faulty gauges or operator error. Once the valve cracking pressure is reached, the LANSAS relief valve will open, relieving the excess air pressure from over-inflation and the valve will reset (reseal) at or just below the Required Inflation Pressure of the plug.

FEATURES:
No more catastrophic plug failures due to defective gauges or operator error. If the plug is accidently over-inflated, the relief valve engages, relieving any excess pressure and preventing plug rupture.
When the relief valve engages, it relieves the excess pressure in the plug, but does not completely deflate, allowing the plug to stay in use throughout the application. Unlike other manufacturers rupture protection devices that cause their plugs to fully deflate, shutting the job down and causing tests to fail or back pressure to be relieved. The LANSAS RUPTURE PROTECTED Pipe Plugs work without this hassle or mess!
The relief valve is recessed mounted to prevent physical damage during transportation and jobsite use.
The LANSAS Rubber Dirt Cover protects the air relief valve against the harsh work environment. Dirt and debris is kept away from the valve.
The relief valve is not a single use device and will relieve over and over. Unlike other manufacturers who offer a one-time use solution which requires you to purchase replacement units each time. Our less costly   relief valve will protect your plug for many uses.
The air relief valve on the LANSAS RUPTURE PROTECTED Pipe Plug begins to relieve air from the plug once is has been over-inflated by a maximum of 33% above the Required Inflation Pressure for the plug and resets (reseals) when the pressure is equalized at or just below the Required Inflation Pressure again.


RUPTURE PROTECTED FRONT AND BACK DOMEHEAD PLUGS    

P/N Description
050-1530RP 15"-30" Back Plug with Rupture Protection
051-1530RP 15"-30" Front Plug with Rupture Protection
050-2036RP 20"-36" Back Plug with Rupture Protection
051-2036RP 20"-36" Front Plug with Rupture Protection
050-2448RP 24"-48" Back Plug with Rupture Protection
051-2448RP 24"-48" Front Plug with Rupture Protection
050-3660RP 36"-60" Back Plug with Rupture Protection
051-3660RP 36"-60" Front Plug with Rupture Protection
050-4278RP 42"-78" Back Plug with Rupture Protection (NEW SIZE AVAILABLE!)
051-4278RP 42"-78" Front Plug with Rupture Protection (NEW SIZE AVAILABLE!)
050-4872RP 48"-72" Back Plug with Rupture Protection (NEW SIZE AVAILABLE!)
051-4872RP 48"-72" Front Plug with Rupture Protection (NEW SIZE AVAILABLE!)
050-5496RP 54"-96" Back Plug with Rupture Protection (NEW SIZE AVAILABLE!)
051-5496RP 54"-96" Front Plug with Rupture Protection (NEW SIZE AVAILABLE!)
050-6096RP 60"-96" Back Plug with Rupture Protection (NEW SIZE AVAILABLE!)
051-6096RP 60"-96" Front  Plug with Rupture Protection (NEW SIZE AVAILABLE!)


YouTube Rupture Protected Plug Demonstration Video

 





Lansas Products
Manufactured by Vanderlans and Sons, Inc.
1320 South Sacramento Street, Lodi, CA 95240 USA
209.334.4115 or 800.452.4902
Fax 209.339.8260

Email Us


Site designed and managed by ConnecTec Communications