Terms & Conditions

All LANSAS products are warranted against manufacturing defects for a period of two years from the date of sale. At their option, Vanderlans and Sons, Inc., will either repair or replace any product found to have had a factory defect. Any product suspected of being defective must be returned, pre-paid freight, to the factory for inspection. Freight collect shipments will be refused.

No liability shall exist in case of misuse, abuse, over/under inflation or other negligence, or for any costs other than the replacement costs of the item in question. No liability is, or shall be, assumed for any consequential damages arising from the use of any device other than stated in this warranty.

Product warranty shall apply only to the original purchaser and is not transferable or assignable.

Manufacturer specifically disavows any other representation, warranty, or liability relating to the condition or use of this product.

Inflatable products are intended for use in piping systems only. Do not inflate product unless totally confined within proper size pipe.

Each inflatable item is specifically rated for certain pressures under specific conditions. Do not over or under exceed these pressures, as specified for each device. If in doubt, contact the factory.

All inflatable devices must be used with proper blocking or restraints that meet or exceed the standards of the industry, consult a registered engineer.

Inflatable devices are designed for inflation in piping only. Device must conform in rated size(s) to piping size.

Through misuse, abuse, improper storage, age or component failure or malfunction, a device may fail. The user is warned to consider the failure mode of all parts (components) to be used in the system and to provide adequate safeguards to prevent personal injury, death or property damage in the event of a failure mode occurrence.

All end users must be thoroughly instructed in all safety aspects when using these products and how to provide for personal protection in the event of a failure mode.

It is the responsibility of the user to check all components for both accuracy and integrity immediately prior to use.

All gauges and pressure components must be checked and certified for function and accuracy.

All end users are cautioned to review specific warnings, ratings, pressures and other information immediately prior to use.

This information may be found in instruction sheets, product specification sheets, catalogs/brochures on the device, and/or on attached hang tags.

If such information cannot be located, the user is requested to call the factory at (800) 452-4902 for specific information.

Such information will be supplied in written form by FAX or mail upon request. Lansas safety information can also be found on the internet.

Do not operate or attempt to use any inflatable device without proper training and complete information regarding inflatable to be used.

Back to catalog index...

Lansas Products
Manufactured by Vanderlans and Sons, Inc.
1320 South Sacramento Street, Lodi, CA 95240 USA
209.334.4115 or 800.452.4902
Fax 209.339.8260

Site designed and managed by ConnecTec Communications